Thermal Unit Engine Cylinder 77 Cc Big Racing Minarelli AM6 STAGE6

Description

Thermal Unit Engine Cylinder 77 Cc Big Racing Minarelli AM6 STAGE6
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Shop
Who we are
Terms of sale
Withdrawal and Privacy
Pick & Pay
Customer Service Tel:
+39 030 7050573
+39 030 5788078
Mobile:
+39 328 5486554
CYLINDER ENGINE CYLINDER 77 CC BIG RACING MINARELLI AM6 STAGE6
From its inception, the Stage6 has been committed to developing tuning components that improve performance and not hesitate to take on new tasks. From today they are entering the gearmotor market by introducing the Stage6 Big Racing 77cc cylinder kit for Minarelli AM6. The cylinder kit includes: 77cc cylinder, aluminum hole, 50mm, with 5 transfer ports and 32mm bridge exhaust port 1 Vertex single-band piston, d. 50mm high compression head, one piece, aluminum gasket set (base and head gaskets) The cylinder was developed in close collaboration with the experts of MXS Racing
taking advantage of their considerable experience in the field of mopeds and drawing on their vast technical know-how, Stage6 was able to design a new and convincing tuning cylinder. The cylinder has a rather simple and inconspicuous external appearance, but we all know that appearances can be deceptive. We are talking about a real Big Bore - the cylinder arrangement is not based on a modified standard model which has been milled open to create a larger hole, but has been designed as a Big Bore from the start, with matching transfer ports and a drain fitting large enough to support excess performance. Big Racing cylinders impress with ease of installation, exceptional performance and high reliability. The installation is very simple, the milling of the base or any other modification is not necessary. The squish is preset to an optimized value for the respective engine type. In terms of power, the BigRacing cylinders throw it off the playing field - we measured a whopping 23 HP and 13 Nm on our P4 dyno using a standard configuration (24mm carburetor, original ignition, racing exhaust etc. The connection times are relatively low, the cooling system volume is large enough and the piston is a high quality Vertex piston. All these factors contribute to the high reliability and robustness of the cylinder, provided the configuration and adjustments are appropriate. The displacement is 77 cc (50 mm piston) and is therefore not road legal (in many countries). We highly recommend a reinforced crankshaft with standard stroke. The exterior is a replica of the original 49cc cylinder
don't worry, this is definitely a 77cc cylinder! Note: It is recommended to use long studs to obtain correct tightening torque when tightening the bolts.
Stage6 Big Racing 77cc cylinder kit, Minarelli AM6
Item number: S6-7018810
Brand: Stage6
Approval: No
Displacement: 77cc
Stroke: Original
Connecting rod length: Original
Product Assortment: Hyper racing
Material: Aluminum
Bore: 50 mm
Piston pin: 12 mm
Search for other products for your vehicle:
CONDITIONS
General conditions
Payment methods
WHO WE ARE
Who we are
RSS feed
Favorites
AGENCY
BRIXIA MOTO srl
via Aldo Moro 32/34
25030 - Cologne (BS)
CONTACT US
Phone
+39 030 7050573
Phone
+39 030 5788078
Mobile phone
+39 328 5486554
2017 © BRIXIA MOTO srl CF and PI IT-03058030986
taking advantage of their considerable experience in the field of mopeds and drawing on their vast technical know-how, Stage6 was able to design a new and convincing tuning cylinder. The cylinder has a rather simple and inconspicuous external appearance, but we all know that appearances can be deceptive. We are talking about a real Big Bore - the cylinder arrangement is not based on a modified standard model which has been milled open to create a larger hole, but has been designed as a Big Bore from the start, with matching transfer ports and a drain fitting large enough to support excess performance. Big Racing cylinders impress with ease of installation, exceptional performance and high reliability. The installation is very simple, the milling of the base or any other modification is no
MPN
S6-7018810
Brand
STAGE6
Marca
STAGE6
EAN
Non applicabile