-40%
Oberwerk 25x100 IF Deluxe Binocular w/ 5000 Series tripod/Head, red dot, cases
$ 396
- Description
- Size Guide
Description
The new Oberwerk 25x100mm Deluxe is ideal for serious binocular astronomy or long-range terrestrial viewing on a budget. This is the IF (individual focus) model. New prism mounting system uses precision floating plates (as found on our Ultra Series), which do a better job of maintaining alignment than common prism-tilt systems. Features fully broadband multi-coated optics (all air-to-glass surfaces, including prisms), rubber-armored all-metal waterproof construction (nitrogen filled), braced and hinged objective tubes, and built-in mount. This binocular has a 2.4° field of view, with very good sharpness across the entire field. The IF has fold-down eyecups which work well with glasses (eye relief is a comfortable 18mm). Includes objective covers, ocular caps, and an exclusiveHeavy-Duty aluminum-frame case
!
Weight
25 lbs
Dimensions
26 × 15 × 12 in
FOV
2.4°
Eye Relief
18.0mm
Exit Pupil
4.0mm
IPD Range
56-74mm
Minimum Focus
30m
Product Weight
10 lbs.
Product Dimensions
L=18.5", W=10", H=4"
The Oberwerk 5000 Series tripod and head is the best value on the market for a heavy-duty tripod for binocular astronomy. It has a high load capacity (up to 16 lbs.) and even greater maximum height (7 feet!)- plenty of height to allow standing underneath a binocular when it is pointed up at the night sky. Tripod construction is black-anodized aluminum, the fluid head is cast aluminum, with a total weight of 13 lbs. The fluid head includes dual panning handles and one quick-release plate. Also included is a padded carrying case.
This tripod/head combo is ideal for all Oberwerk binoculars up to the 110mm Ultra Series, or any other binocular up to 16 lbs.
5000 Series Tripod
Sturdy 3-section tubular aluminum legs with quick-flip locks
Crank-up elevator column for easy height adjustments
Maximum height: 84″
Collapsed length: 36″
Max. weight capacity: 24 lbs.
Weight: 11 lbs.
5000 Series Head
All-aluminum fluid head provides smooth azimuth and altitude motion
Internal counter-spring helps to balance load as it tilts from horizon to zenith
One 3/8-16, 1/4-20 quick-release plate
Dual panning handles
Max. weight capacity: 16 lbs.
Weight: 2 lbs.
The Oberwerk MRF (Multi-Reticle Finder) projects an easy-to-see reticle, focused at infinity, that is selectable between 4 patterns (shown below), in 2 colors (red and green),
with continuously-variable brightness using a large easy-to-operate dial. The reticle can be seen from as close as a couple inches to more than a foot from behind. Steer the binocular so the reticle pattern is on your target, then when you look through the binocular eyepieces, your target will be in the middle of the field of view.
CR2032 lithium battery included.
The Picatinny rail adapter clamps to the horizontal bar collar
to allow mounting the
Oberwerk Multi-Reticle Finder
. Black-anodized aluminum construction. Should fit any binocular that has a 1″ diameter collar on a horizontal mount bar.