500 FT Shielded two wire probe sensor cable - Veeder-Root Tank Monitors EQ-88760

Description

NEW 500 FOOT ROLL OF TWO WIRE STRANDED - SHIELDED TANK MONITOR CABLE -
EQ-88760
VEEDER-ROOT
VERBIAGE
- Preferred Wiring Type
Use #14 - #18 AWG stranded copper, shielded cable (REQUIRED) and manufactured with a material suitable for the environment, such as Carol C2534, Belden 88760, or Belden 88760 Equivalent. Wiring to be installed as a Class 1 circuit with the following provisions: This equivalent cable is exactly the same wire without the high price.
• Wire run must not exceed 1000 feet to meet intrinsic safety requirements,
• Capacitance does not exceed 100
pf
/ft,
• Inductance does not exceed 0.2
ì
H/ft.
Alternate Wiring Type - When Approved by the Local Authority Having Jurisdiction!
Use #22 AWG stranded copper, shielded cable (REQUIRED) and manufactured with a material suitable for the environment, such as Belden 88761 or Equivalent. Wiring to be installed as a Class 1 circuit with the following provisions:
• Wire run must not exceed 750 feet to meet intrinsic safety requirements,
• Capacitance does not exceed 100 pF/ft,
• Inductance does not exceed 0.2
ì
H/ft.
Splices
Veeder-Root recommends that no splices be made in the wire run between the Probes/Sensors and the Tank Monitor.  Each splice degrades signal strength and could result in poor system performance.
NOTE: IF YOU NEED SMALLER RUNS AND YOU KNOW THE
LENGTHS
AND HOW MANY WIRES, LET ME KNOW AND I CAN ALSO SELL YOU SHORTER CUTS OFF OF EXISTING ROLLS, BUT YOU MAY HAVE TO LAY OUT WIRES ON THE GROUND TO PULL THEM. EACH BUNDLE OF WIRES AND SHIPPING WOULD BE QUOTED PER REQUEST.
THANKS FOR LOOKING!!!!!!!